bmw Workshop Repair Guides

BMW 5 Series E60 525xd M57T2 Workshop Service and Repair Manuals

7 RA Removing And Installing_replacing Steering Column > < 5 RA Removing And Installing_replacing Steering Angle Sensor
Page 1
background image

32 31 087

Removing and installing/replacing steering
column lock

Note:

Steering column lock can only replaced in vehicles from 09/2005
with electric steering column adjustment.

 

Necessary preliminary tasks:

Remove trim panel for pedal assembly.

Disconnect plug connection (1).

Note:

There is the risk of mixing up the 3-pin plug connection for the
footwell light.

 

Release shear screws (2).

Remove steering column lock (3).

Installation:

Spherical side of shim must point to steering column lock (3).

After installation:

Carry out operational check.

RA  Removing and installing/replacing steering column lock

BMW AG - TIS

20.02.2013  10:23

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

7 RA Removing And Installing_replacing Steering Column > < 5 RA Removing And Installing_replacing Steering Angle Sensor