5 Series E60 525xd (M57T2) SAL
Expose pressure line up to connection on power steering gear.
Release banjo bolt (1) and remove pressure line (2).
Installation:
Replace all sealing rings.
Make sure holders are correctly positioned (see picture).
Tightening torque 32 41 3AZ
.
After installation:
•
Fill and bleed hydraulic system
•
Check pipe connections for leaks
RA Replacing pressure line for power steering (M57T2 AWD)
BMW AG - TIS
20.02.2013 10:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
