5 Series E60 525xd (M57T2) SAL
33 33 111
Replacing all rubber mounts for rear axle
carrier
Special tools required:
•
33 4 153
•
33 4 154
•
33 4 155
•
33 4 271
•
33 4 272
•
33 4 274
•
33 4 275
Warning!
Danger of explosion!
Do not point air jet from hot air blower at fuel tank!
Necessary preliminary tasks:
•
Lower rear axle carrier
Withdrawing rubber mount:
Assemble special tools 33 4 154 , 33 4 155 , 33 4 272 ,
33 4 274 and 33 4 275 as illustrated.
Check installation position of special tool 33 4 274 to rubber
mount and 33 4 272 to bearing bushing, correct if necessary.
Using a hot air blower, heat bearing bushing at max. 600
°
C outlet
temperature for approx. 2 minutes.
Pull out rubber mount by turning special tool 33 4 155 .
RA Replacing all rubber mounts for rear axle carrier
BMW AG - TIS
20.02.2013 11:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
