5 Series E60 525xd (M57T2) SAL
Clean brake caliper holder at hammerhead guides and apply a
thin coating of anti-squeak compound.
Refer to BMW Service Operating Fluids.
Note:
After completing work:
-
Fully depress brake pedal several times so that brake
linings contact brake discs.
-
When installing new brake pads at front and rear axles,
brake fluid level must be brought up to "MAX" marking.
-
Read and comply with notes on braking in new brake
discs / brake pads.
-
When replacing linings, reset CBS display in accordance
with factory specification.
Important!
On the E60 M5 and E63 M6 the fault memory entry
"Mastervac vacuum pressure sensor" may be stored after the
brake linings have been replaced.
The fault memory entry must be deleted. The vacuum
pressure sensor only has to be replaced if the fault is entered
repeatedly.
RA Removing and installing/replacing brake linings on both front disc brakes
BMW AG - TIS
20.02.2013 11:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
