5 Series E60 525xd (M57T2) SAL
Check minimum brake disc thickness:
-
Position special tool 34 1 280 at three measuring points in
area (1) and measure.
-
Compare measurement result and lowest value with setpoint
value.
New brake linings may only be installed if the brake disc thickness
is greater than or equal to the minimum brake disc thickness (MIN
TH).
Check dust sleeve (1) for damage and replace if necessary.
Clean contact face (2) of brake piston and apply a thin coating of
anti-squeak compound.
Important!
Dust sleeve must not come into contact with anti-squeak
compound as this may cause the dust sleeve to swell.
Clean mounting faces (1) and (2) of brake lining hammer
heads/brake caliper housing and coat with anti-squeak compound.
Clean contact face (3) of brake caliper and apply a thin coating of
anti-squeak compound.
RA Removing and installing or replacing brake linings on both rear disc brakes
BMW AG - TIS
20.02.2013 11:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
