5 Series E60 525xd (M57T2) SAL
Installation:
Replace self-locking nuts.
Tightening torque 34 31 1AZ
.
Installation:
Replace sealing ring.
Important!
Brake booster (1) must be loosely screwed into place so as
not to jam brake master cylinder (2) during installation.
Installation:
When inserting the brake master cylinder (2) into the brake
booster (1), make sure the pressure rod of the brake booster and
that of the brake master cylinder meet each other on one level.
RA Removing and installing / replacing master brake cylinder for DSC
BMW AG - TIS
20.02.2013 11:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
