5 Series E60 525xd (M57T2) SAL
34 32 881
Replacing front left or right brake hoses
Note:
After completing work: Bleed braking system
Press clutch pedal down to floor and secure with pedal support.
Note:
The pedal support may only be released when the brake lines are
reconnected.
This prevents brake fluid from emerging from the expansion tank
and air from entering the system when the brake lines are opened.
Pull brake hose out of holder (1).
Important!
Grip brake hose at square head (3) to prevent connecting
piece from turning in retaining bracket.
Detach brake hose from brake line (2).
Installation:
Tightening torque 34 32 1AZ
.
Detach brake hose from brake caliper (4).
Tightening torque 34 32 4AZ
.
Important!
Never twist brake hose when installing it and avoid all contact
with parts attached rigidly to the body.
Installation:
First tighten brake hose on brake calliper.
Move wheels into straight-ahead position.
Insert brake hose in bracket and screw onto brake pipe.
RA Replacing front left or right brake hoses
BMW AG - TIS
20.02.2013 11:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
