5 Series E60 525xd (M57T2) SAL
34 33 071
Replacing vacuum hose for brake booster
(M54)
Important!
Before beginning work, fully press the brake pedal several
times to reduce the vacuum pressure in the brake booster.
This makes it easier to remove the PA pipe.
Non-return valve and PA pipe are welded together and are
replaced together as a single unit.
Necessary preliminary tasks:
•
Read and comply with General Information.
•
Remove lower section of microfilter housing.
Detach non-return valve (1) from brake booster.
Unfasten hose clip (1).
Detach moulded hose (3) from PA tube.
Withdraw moulded hose (3) from fixture (2).
Installation:
Replace hose clip.
RA Replacing vacuum hose for brake booster (M54)
BMW AG - TIS
20.02.2013 11:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
