5 Series E60 525xd (M57T2) SAL
Mark severance cut (1) in accordance with measurement a and
cut engine carrier completely.
Measurement a = approx. 38 mm from center of bore.
Preparation of new part:
Mark severance cut (1) in accordance with measurement a and
cut completely.
Measurement a = approx. 115 mm from front wall mounting plate.
Installation:
Adjust new part to fit with straightening attachment or universal
mount.
Drill holes for rivets only after expanding repair elements.
Bond new part.
Rivet new part.
RA Replacing left engine carrier (partial replacement before front axle)
BMW AG - TIS
20.02.2013 12:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
