5 Series E60 525xd (M57T2) SAL
Cut top inner C-pillar (1) along line (2).
Open weld joints in area (3).
Preparation of new part:
Mark severance cut along line (1) (approx. 20 mm overlap on
vehicle) and cut.
Adapt new part in areas (2) to vehicle.
Open weld joints in areas (1).
Open weld joints in areas (1).
Installation:
Adjust new parts to fit with straightening attachment or universal
mount.
RA Replacing complete rear left wheel arch (rear left side panel removed)
BMW AG - TIS
20.02.2013 13:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -