5 Series E60 525xd (M57T2) SAL
Mark severance cuts in accordance with specified measurements and cut.
Important!
Cut outer metal sheet only.
Sunroof water drain hose is located behind severance cut a.
Measurement a = approx. 105 mm from roof edge.
Measurement b = approx. 120 mm from middle of lower lock striker screw point.
Open weld joints in areas (1).
Installation information:
-
Apply window glass adhesive to cavity acoustic baffle (2).
-
Weld in reinforcement plates at severance cuts.
Note:
The following work step applies to the M5 only.
The wheel arch connection area is partially glued on the M5!
Expose and detach wheel arch connection area.
Note:
The work step for the M5 ends here.
RA Replacing rear left side panel (partial replacement before longitudinal member c
BMW AG - TIS
20.02.2013 13:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
