5 Series E60 525xd (M57T2) SAL
51 24 100
Removing and installing/replacing rear lid
lock (upper section)
Necessary preliminary tasks:
•
Remove panel for rear lid
Release screws (2) and feed out upper section of rear lid
lock (3).
Disconnect plug connection (1).
Installation:
Use self-tapping screws when replacing upper section of rear lid
lock (3).
Tightening torque 51 24 1AZ
(E82, E88, E90, E92).
Tightening torque 51 24 5AZ
(E60, E63, E64).
Remove lock (1).
Lever out actuating rod (2) and remove upper section of rear lid
lock (3).
Installation:
Make sure lock (1) is correctly seated.
Installation:
Perform function check with rear lid open.
RA Removing and installing/replacing rear lid lock (upper section)
BMW AG - TIS
20.02.2013 14:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
