bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

12 RA Removing And Installing (replacing) Right Decorative Strip On Instrument Panel > < 10 RA Removing And Installing_replacing Centre (bottom) Instrument Panel Trim
Page 1
background image

51 45 370

Removing and installing (replacing) left
decorative strip on instrument panel

Special tools required:

64 1 020

Necessary preliminary tasks:

Remove light operator unit

Release screws (1).

Unclip left decorative strip on instrument panel complete with left
fresh-air grill (2) at top and remove in direction of arrow.

Installation:

Make sure clips (3) are correctly seated on mountings of left
fresh-air grill (2).

Replacement:

Release lock (2) with special tool  64 1 020 .

Unclip left fresh-air grill (5) in direction of arrow over retaining
lugs (1) and remove from left decorative strip on instrument
panel (3).

Installation:

Make sure left fresh-air grill (5) is correctly seated in
mountings (4) of left decorative strip on instrument panel (3).

Make sure retaining lugs (1) and lock (2) of left decorative strip
on instrument panel (3) are correctly seated.

RA  Removing and installing (replacing) left decorative strip on instrument panel

BMW AG - TIS

20.02.2013  16:07

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

12 RA Removing And Installing (replacing) Right Decorative Strip On Instrument Panel > < 10 RA Removing And Installing_replacing Centre (bottom) Instrument Panel Trim