bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

18 RA Removing And Installing_replacing Head Restraint Mount On Left Or Right Front Se > < 16 RA Removing And Installing_replacing Guide For Front Left Or Right Head Restraint
Page 1
background image

52 14 040

Removing and installing/replacing outer
cover on left or right front seat (basic/electric)

If necessary, move seat fully forwards and upwards. 

Remove trim:

1. 

Unclip at rear towards top side

2. 

Pull on belt opening to one side

3. 

Bend trim open slightly at top and bottom on actuating unit

4. 

Bend open slightly at top and bottom and pull outwards a little

Installation:

Retaining clips must not be damaged.

RA  Removing and installing/replacing outer cover on left or right front seat (basic

BMW AG - TIS

20.02.2013  17:11

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

18 RA Removing And Installing_replacing Head Restraint Mount On Left Or Right Front Se > < 16 RA Removing And Installing_replacing Guide For Front Left Or Right Head Restraint