bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

19 RA Removing And Installing_replacing Lock For Left Or Right Rear Seat Backrest (thr|Page 2199 > < 18 RA Removing And Installing_replacing Actuator For Left Or Right Rear Seat Backrest
Page 1
background image

52 26 311

Removing and installing/replacing lock for left
or right rear seat backrest (through-loading
system)

Unlock rear seat backrest and fold down.

Note:

If the rear seat backrest cannot be unlocked, carry out 
emergency opening.

Unclip Bowden cable from holders (1).

Unfasten screws (2).

Tightening torque 52 26 10AZ

.

Feed lock (1) out of installation opening slightly and unclip
Bowden cable (2).

Remove lock completely from installation opening.

Installation:

Catches (2) on lock must not be damaged.

Bowden cable must be correctly anchored in catches (2).

Installation:

Slide guide lug (1) of lock into opening (2).

RA  Removing and installing/replacing lock for left or right rear seat backrest (thr

BMW AG - TIS

20.02.2013  17:53

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

19 RA Removing And Installing_replacing Lock For Left Or Right Rear Seat Backrest (thr|Page 2199 > < 18 RA Removing And Installing_replacing Actuator For Left Or Right Rear Seat Backrest