5 Series E60 525xd (M57T2) SAL
61 12 200
Replacing wiring harness in left or right front
door (long version)
Necessary preliminary tasks:
•
Close front side window completely
•
Disconnect battery negative lead
•
Remove front door trim panel
•
Remove sound insulation in front door
Release cable (1) from door wiring harness (2).
Disconnect plug connection (3).
Release door wiring harness (2) at point (4).
Installation:
Make sure door wiring harness (2) is correctly laid.
Note:
Front side panel shown removed for purposes of clarity.
Release screw (1), fold door wiring harness plug on A-pillar (2)
downwards slightly and remove.
Unlock plug connection behind and disconnect.
Pull rubber grommet (3) in direction of arrow out of front
door (4).
Feed out door wiring harness towards front to A-pillar and remove.
RA Replacing wiring harness in left or right front door (long version)
BMW AG - TIS
20.02.2013 19:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -