5 Series E60 525xd (M57T2) SAL
Remove blade (1) and replace.
Installation:
Make sure blade (1) is correctly seated on locating points (2).
Open pliers (3).
Slide optical fibre (1) into cutting device (2) until insulation of
optical fibre (1) butts against clamping device.
Close pliers (3) fully and keep closed.
Remove optical fibre (1).
RA Cutting off, stripping insulation and cutting optical fibres to length
BMW AG - TIS
20.02.2013 19:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
