5 Series E60 525xd (M57T2) SAL
61 31 220
Removing and installing/replacing
multifunction steering wheel switch (from
03/2007)
Necessary preliminary tasks:
•
Remove airbag unit
Release screws (1).
Disconnect plug connection (2).
Remove retaining plate (3) from steering wheel.
Installation:
Make sure electrical leads are correctly routed.
Note:
Illustrations depict removal of the left multifunction steering wheel
switch. The right multifunction steering wheel switch is removed in
the same way.
Release screws (1).
Unclip multifunction steering wheel switch (2) at point (3).
Disconnect associated plug connections and remove multifunction
steering wheel switch (2).
Installation:
Make sure guide pins (4) are correctly seated.
RA Removing and installing/replacing multifunction steering wheel switch (from 03/2
BMW AG - TIS
20.02.2013 20:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -