5 Series E60 525xd (M57T2) SAL
61 31 220
Removing and installing/replacing
multifunction steering wheel switches (sport
steering wheel, from 09/2005)
Necessary preliminary tasks:
•
Remove airbag unit
Release screws (1).
Important!
Risk of breakage!
Lever out switches (2) complete with decorative strip (3) all
round, do not tilt!
Disconnect associated plug connections and remove
switches (2) complete with decorative strip (3).
Installation:
Make sure electrical leads are correctly routed.
Release screws (2) and remove left multifunction steering wheel
switches (3) from decorative strip (1).
Installation:
Guide pins (4) must not be damaged and must be correctly
inserted.
Make sure there is a uniform gap between both multifunction
steering wheel switches (3) and decorative strip (1).
RA Removing and installing/replacing multifunction steering wheel switches (sport s
BMW AG - TIS
20.02.2013 20:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
