5 Series E60 525xd (M57T2) SAL
Release screws (1) on thigh support.
Disconnect plug connection (2).
Remove thigh support (3) towards top.
Installation:
Insert screws (1) with Loctite.
Unclip trim (1) for thigh support carrier.
Detach seat cover (1).
Tilt back seat cover (1) with padding towards middle of vehicle.
Loosen retainers (1).
Tilt back thigh support (2) towards rear.
Remove all remnants of clips from seat cover and seat
mechanism.
Installation:
Bend new retainers closed with pliers 52 0 050 .
RA Removing and installing/replacing control unit for backrest width adjustment
BMW AG - TIS
20.02.2013 21:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
