bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

4 RA Removing And Installing_replacing Windscreen Washer Pump > < 2 RA Removing And Installing_replacing A Jet Nozzle In Windshield Washer System
Page 1
background image

61 71 061

Replacing (removing and installing) fluid
reservoir for windscreen washer unit

Necessary preliminary tasks:

Remove level switch

Remove windscreen washer pump

If necessary, remove washer pump for headlight washer

system

Release screws (1) on fluid reservoir for windscreen washer unit.

Release screw (1) and pull fluid reservoir for windscreen washer
unit (3) forward in direction of arrow slightly.

Disconnect filler hose (2).

If necessary, detach hose for headlight washer system from fluid
reservoir for windscreen washer unit (3).

Remove fluid reservoir for windscreen washer unit (3).

Installation:

Replace strainers on washer pumps

Coat sealing rings of washer pumps with antiseize agent

Lay lines of washer pumps without kinks and clip into holders

on fluid reservoir

Fill fluid reservoir

RA  Replacing (removing and installing) fluid reservoir for windscreen washer unit

BMW AG - TIS

20.02.2013  21:36

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

4 RA Removing And Installing_replacing Windscreen Washer Pump > < 2 RA Removing And Installing_replacing A Jet Nozzle In Windshield Washer System