bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

21 RA Replacing Sensor Fan For Interior Temperature > < 19 RA Replacing Servodrive Of Stratification Flap
Page 1
background image

64 11 875

Removing and installing/replacing servodrive
for defrosting flap

Necessary preliminary tasks:

Remove trim panel for pedal assembly.

Remove air distributor in footwell and heating duct in rear

compartment on left.

Press lock (1) and pull out servodrive for defrosting flap (2) in
direction of arrow. 

Unfasten plug connection (3) and disconnect. 

Installation:

Follow repair instruction "Installing servodrive".

Servodrive for defrosting flap (2) must snap audibly into place.

RA  Removing and installing/replacing servodrive for defrosting flap

BMW AG - TIS

20.02.2013  22:42

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

21 RA Replacing Sensor Fan For Interior Temperature > < 19 RA Replacing Servodrive Of Stratification Flap