5 Series E60 525xd (M57T2) SAL
64 12 120
Removing and installing/replacing intake
muffler for independent/auxiliary heater
Necessary preliminary tasks:
•
Remove left front wheel.
•
Remove front left wheel arch lining.
•
Remove left underbody paneling.
Disconnect plug connections (1) and (2).
Important!
To avoid damaging the independent heater, it is absolutely
essential to adhere to the following connecting sequence for
the plug connections during installation:
1.
Plug connection (1)
2.
Plug connection (2)
Release screws (3).
Fold independent heater (4) in direction of arrow to one side.
Installation:
Make sure exhaust pipe of independent heater (4) is correctly
seated in muffler (5).
Detach cable strap (1).
Release spring clip (2) and detach corrugated tube from
independent/auxiliary heater.
Remove intake muffler for independent/auxiliary heater (3).
RA Removing and installing/replacing intake muffler for independent/auxiliary heate
BMW AG - TIS
20.02.2013 22:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
