5 Series E60 525xd (M57T2) SAL
66 31 006
Removing and installing (replacing) ACC
sensor
Necessary preliminary tasks:
•
Remove front bumper trim
Lift out wiring harness (1) at points (2).
Disconnect impact absorber (3) at carrier (4) and remove.
Installation:
Mountings (1) of impact absorber (2) must not be damaged.
Unfasten plug connection (1) and disconnect.
Unscrew nuts (2).
Installation:
Replace self-locking nuts.
Release screw (3).
Feed out ACC sensor (4) with retaining plate (5) in direction of
arrow and remove.
RA Removing and installing (replacing) ACC sensor
BMW AG - TIS
21.02.2013 01:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
