5 Series E60 525xd (M57T2) SAL
Pull drive shaft (1) in direction of arrow out of drive shaft
receptacle (2).
Installation:
Make sure drive shaft (1) is correctly seated in receptacle (2).
Disconnect plug connection (3).
Remove circlip (4).
Feed out drive unit for backrest head adjustment (5) and remove.
Removal and installation only:
Do not turn spindle (1) in order not to change measurement A.
Replacement only:
Adopt measurement A of removed drive unit for backrest head
adjustment (2). If necessary, adjust measurement A by turning
spindle (1).
Replacement:
Initialize drive unit for backrest head adjustment.
RA Removing and installing/replacing drive unit for head restraint adjustment (comf
BMW AG - TIS
21.02.2013 01:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
