5 Series E60 525xd (M57T2) SAL
67 64 010
Removing and installing/replacing drive unit
for electric steering column adjustment
Necessary preliminary tasks:
•
Move steering wheel into maximum "lower" and "extended"
position
•
Remove driver's side storage compartment
Unlock plug connections (1) and (2) of drive unit for electric
steering column adjustment (3) and disconnect.
Note:
For purposes of clarity, illustrations show steering column
removed.
Remove screws (1) and (2).
Installation:
Replace screws (1) and (2).
Tightening torque, 32 31 12AZ
.
Important!
Pay attention to drive shafts (1) and (3) when removing and
installing drive unit for electric steering column
adjustment (4). Do not bend or twist.
Drive shafts (1) and (3) must be exactly inserted in
associated mountings (2).
Detach drive shafts (1) and (3) from associated mountings (2)
and remove drive unit for electric steering column adjustment (4).
RA Removing and installing/replacing drive unit for electric steering column adjust
BMW AG - TIS
21.02.2013 01:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
