5 Series E60 525xd (M57T2) SAL
67 66 012
Removing and installing/replacing drive unit
for lumbar support on left or right front seat
(comfort seat)
Necessary preliminary tasks:
•
Remove both rear panels on front seat
If necessary, unhook backrest cover (1) from backrest.
Cut through cable ties (2).
Unclip wiring harness at point (3) towards front.
Release screw (4) and feed out valve unit (5) towards top.
Cut through cable tie (1).
Push jacket of drive unit for lumbar support (2) in direction of
arrow over drive unit for lumbar support (3).
RA Removing and installing/replacing drive unit for lumbar support on left or right
BMW AG - TIS
21.02.2013 01:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
