5 Series E60 525xd (M57T2) SAL
Tightening torque 72 12 03AZ
.
Feed all holders (2) out of sheet metal flange.
Note:
The retainers behind the holders can break off. These retainers serve as an installation aid during series
production and are not important for repairs.
Release rear screw.
Tightening torque 72 12 04AZ
.
Remove rear AHPS2.
Release front screws (1 and 2).
Tightening torques:
-
Screw 1
72 12 04AZ
-
Screw 2
72 12 06AZ
Carefully feed gas generator out of guides towards rear,
unlocking and disconnecting plug (3) in the process.
Remove gas generator completely.
Security version:
Gas generator (1) is mechanically modified, spare part changed.
RA Removing and installing/replacing left or right AHPS2 head airbag
BMW AG - TIS
21.02.2013 02:17
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
