5 Series E60 528i (N52K) SAL
Important!
Do not damage gasket.
Release nuts (1) on left and right.
Fold metal cover of left and right sensor units upwards.
Important!
Fuel line is pressurised.
Catch escaping fuel in a suitable container.
If necessary, unlock and disconnect plug connection (1) of right
sensor unit.
If necessary, release and disconnect hose (2) for independent
heating (E60 only).
Release rotary catch of left and right sensor units with special tool
16 1 020 .
Installation:
Replace rubber seal on left and right.
Tightening torque 16 14 2AZ
.
RA Removing and installing/replacing fuel gauge sensor (complete right sensor unit)
BMW AG - TIS
21.02.2013 06:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -