5 Series E60 528i (N52K) SAL
Note:
Open glovebox.
Fold back covers (1) on CD changer (3).
Release screws (2).
Pull back CD changer (3) slightly.
Unlock and disconnect associated plug connection, remove CD
changer (3).
Installation:
Tightening torque 64 11 1AZ
.
Observe tightening torque (risk of damage).
Installation:
When pushing CD changer in, lay associated wire harness
carefully by hand. For this purpose, in advance:
Remove bottom right trim panel from instrument panel.
Replacement:
Carry out programming/coding.
RA Removing and installing/replacing CD changer
BMW AG - TIS
21.02.2013 22:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -