5 Series E60 528xi (N52K) SAL
31 35 005
Removing and installing/replacing push rod
(stabilizer link) for left or right stabilizer
(AWD)
Important!
Observe safety instructions on raising the vehicle.
Note:
Stabilizer links may only be replaced in pairs.
Release nuts (1); if necessary, grip at Torx socket.
Remove stabilizer link (2).
Installation:
Replace self-locking nuts.
Tightening torque 31 35 11AZ
.
RA Removing and installing/replacing push rod (stabilizer link) for left or right s
BMW AG - TIS
21.02.2013 14:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
