5 Series E60 528xi (N52K) SAL
31 53 040
Removing and installing/replacing right
output shaft bearing block
Necessary preliminary tasks:
•
Remove right output shaft
Release grounding strap on bearing block.
Unfasten screws.
Remove bearing block (1) from oil sump.
Installation:
Replace O-ring
Tightening torque 31 60 1AZ
.
RA Removing and installing/replacing right output shaft bearing block
BMW AG - TIS
21.02.2013 14:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
