5 Series E60 530d (M57T2) SAL
12 51 200
Replacing wiring harness section for injectors
(M57T2)
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Read out fault memory of DDE control unit; if necessary, work
through test schedules
•
Switch off ignition
•
Remove intake air manifold
E60:
Unlock cover (1) with slide (3).
Unfasten screws (2).
Remove electronics box cover (1).
Unlock and disconnect plug on control unit.
E83:
Unfasten screws.
Remove cover (1).
Unlock and disconnect plug on control unit.
RA Replacing wiring harness section for injectors (M57T2)
BMW AG - TIS
21.02.2013 12:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
