bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

4 RA Checking_adjusting Contact Angle Of Windscreen Wiper Arms On Windscreen|Page 2488 > < 4 RA Checking_adjusting Contact Angle Of Windscreen Wiper Arms On Windscreen
Page 2
background image

On right-hand-drive cars, screw (2) must be located on left
side of special tool  61 6 100 .

Adjusting left wiper arm:

Unclip wiper arm cap (1) and remove in direction of arrow.

Installation:

Catches (1) of wiper arm cap (2) must not be damaged.

Make sure wiper arm cap (2) is correctly seated.

Release nut (1) slightly.

Position windscreen wiper arm (2) with special tool 

00 9 331

or  61 6 100  on windscreen.

Turn windscreen wiper arm (2) in direction of arrow until contact
angle is correct. 

Hold wiper arm (2) in this position and tighten down nut (1).

Installation:

Tightening torque 61 61 12AZ

.

Adjusting right wiper arm:

Unclip four-way linkage protective cap (1) and remove in direction
of arrow.

RA  Checking/adjusting contact angle of windscreen wiper arms on windscreen

BMW AG - TIS

22.02.2013  01:38

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

4 RA Checking_adjusting Contact Angle Of Windscreen Wiper Arms On Windscreen|Page 2488 > < 4 RA Checking_adjusting Contact Angle Of Windscreen Wiper Arms On Windscreen