5 Series E60 530d (M57TU) SAL
Special tool 11 0 330 is required to fit the elastobelt.
1.
Installation tool 11 0 331
2.
Adapter ring 11 0 332 (use only on M47TU / M47TU2
engine)
Fit drive belt (1) on A/C compressor.
Draw drive belt (1) with special tool 11 0 331 onto belt pulley in
direction of arrow.
Installation:
Check drive belt for coolant and oil residues, replace if necessary.
Observe direction of rotation if reusing the drive belt.
RA Removing and installing/replacing drive belt (elastobelt) for A/C compressor (M5
BMW AG - TIS
21.02.2013 11:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
