5 Series E60 530d (M57TU) SAL
Release screws on oil-to-water heat exchanger (1).
Remove oil-to-water heat exchanger (1) from oil filter
housing (2).
Installation:
Clean sealing surfaces.
Replace all profile seals.
Important!
It is absolutely essential to carry out an engine oil service to
prevent coolant from mixing with the engine oil.
Assemble engine.
RA Removing and installing/sealing or replacing oil-to-water heat exchanger (M57TU)
BMW AG - TIS
21.02.2013 11:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
