5 Series E60 530d (M57TU) SAL
12 51 001
Replacing wiring harness section for engine
(M57TU)
Necessary preliminary tasks:
•
Read out DDE fault memory.
•
Disconnect battery ground wire.
•
Remove left fresh air duct.
•
Remove tension strut.
•
Remove air cleaner housing.
•
Remove electronics box cover.
•
Remove intake air manifold.
•
Remove underbody protection at front/rear.
•
Remove reinforcement plate.
Unfasten following plug connections:
1
All plug connections on glow elements
2
Plug connection, electric throttle (EU4)
3
Plug connection, charge air sensor
4
Plug connection, A/C compressor
5
Plug connection, heater element (cold countries
only)
6
Plug connection, EVNT (electric servodrive,
turbocharger EU4)
Unfasten following plug connections:
RA Replacing wiring harness section for engine (M57TU)
BMW AG - TIS
21.02.2013 11:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -