Removing and Installing Transmission for 5 Series E60 530d (M57TU)
Note:
Pressure line of clutch slave cylinder remains connected.
Important!
Slowly relieve tension on clutch slave cylinder otherwise air is
drawn in through sealing sleeve.
Release nuts and remove clutch slave cylinder.
Tightening torque 21 52 5AZ
.
Release screw (1).
Disconnect plug (1) from reversing light switch.
Release cable from retainers.
Lever out retainer (1).
Disengage shift rod (2).
Installation:
Grease shift rod.
Grease, refer to BMW Service Operating Fluids.
Make sure shims (3) are in correct position.
RA Removing and installing transmission (GS6-53DZ/ M57TU)
BMW AG - TIS
21.02.2013 13:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -