5 Series E60 530d (M57TU) SAL
Detach holder from transmission fluid lines on transmission sump.
Release screw (1).
Note:
Illustration shows E60 manual transmission.
Crank engine with special tool 11 6 480 at vibration damper in
direction of rotation.
Release all screws of torque converter with special tool
24 1 110 .
Crank engine further and release remaining 3 bolts.
Tightening torque 24 40 1AZ
.
Prepare special tool (1) 24 4 161 with shaped piece (2)
24 4 164 .
Shaped piece (3) 24 4 163 is not required.
RA Removing and installing automatic transmission (6HP26Z) M57TU
BMW AG - TIS
21.02.2013 13:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -