5 Series E60 530d (M57TU) SAL
Note position of sealing sleeve.
Pull out sealing sleeve (1).
Installation:
Screw in sealing sleeve partially (lug in upper area). Turn until lug
engages in groove of transmission. Slide in sealing sleeve.
Lug on sealing sleeve must not be damaged!
Release all screws (1 and 2).
-
1 = M6 x 58 mm
-
2 = M6 x 20 mm
Remove mechatronics.
Important!
E65/66 only:
Mechatronics without protective bar for solenoid valve must
not be reused after removal.
Important!
E65/66 only:
Fit/reuse only mechatronics with protective bar (1) for
solenoid valve.
RA Replacing mechatronics (GA6HP26Z/6HP32Z)
BMW AG - TIS
21.02.2013 13:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
