bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

2 RA Lowering_raising Front Axle Carrier|Page 858 > < 1 RA Replacing Front Axle Carrier|Page 856
Page 1
background image

31 11 506

Lowering/raising front axle carrier

Special tools required:

00 2 030

00 2 040

31 4 012

33 3 274

Warning!

Danger to life!

Secure engine in installation position to prevent it from falling
down.

 

Danger of poisoning if oil is ingested/absorbed through the
skin!

Risk of injury if oil comes into contact with eyes and skin!

 

Important!

Adhere to the utmost cleanliness. Do not allow any dirt to
enter the hydraulic system.

Seal off hydraulic lines with plugs.

Necessary preliminary tasks:

Secure engine in installation position

Remove reinforcement plate

If necessary, remove steering gear cover on both sides

If necessary, remove wheel suspension cover on both sides

Remove lower steering spindle from power steering gear

If necessary, disconnect plug connection on EH converter

and expose line up to engine carrier

If necessary, disconnect plug connection on ride-height

sensor and expose line up to engine carrier

If necessary, unclip vacuum line for engine mount on engine

support arm

RA  Lowering/raising front axle carrier

BMW AG - TIS

21.02.2013  14:46

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

2 RA Lowering_raising Front Axle Carrier|Page 858 > < 1 RA Replacing Front Axle Carrier|Page 856