bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

4 RA Removing And Installing _ Replacing Lower Section Of Steering Spindle > < 2 RA Removing And Installing_replacing Front Section Of Steering Column Cover
Page 1
background image

32 31 020

Removing and installing / replacing lower
section of steering column trim 

Necessary preliminary tasks:

Remove front section of trim

Move steering column in "top" and "extended" position.

Release screw.

Unclip lower trim section (1).

If necessary, unclip wiring harness from lower trim section (1).

Installation:

Replace expansion rivet.

Installation:

Locks (2) must engage in hooks (1) on both sides.

Unclip steering column cover (1) from lower section of trim (2).

Remove lower section of trim (2).

RA  Removing and installing / replacing lower section of steering column trim

BMW AG - TIS

21.02.2013  15:28

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

4 RA Removing And Installing _ Replacing Lower Section Of Steering Spindle > < 2 RA Removing And Installing_replacing Front Section Of Steering Column Cover