5 Series E60 530d (M57TU) SAL
Installation sequence:
1.
Install rear differential with workshop jack and special tool
33 4 420 .
2.
Insert bolts (1) (do not tighten down)
3.
Insert bolt (2), replace and screw on nut (do not tighten
down).
4.
Lower workshop jack and place to one side
5.
Tighten down screws (1)
Tightening torque 33 17 1AZ
.
6.
Tighten down screw (2)
Tightening torque 33 17 1AZ
.
After installation:
•
Check rear differential oil level, correct if necessary
RA Removing and installing/replacing rear differential
BMW AG - TIS
21.02.2013 16:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
