5 Series E60 530d (M57TU) SAL
Insert special tools 33 4 233 and 33 4 232 into corresponding
mountings of special tool 00 2 040 .
Align special tool 00 2 040 to rear axle carrier.
Support rear axle carrier by raising special tool 00 2 030 .
Version with Dynamic Drive:
Partially detach pressure lines for rear axle oscillating motor on
floorpan and remove right bracket from rear axle carrier.
Remove tension struts.
Release screws (1) and remove stop plate (2).
Lower rear axle carrier (3).
Installation:
Check threads for damage; if necessary, repair with Helicoil thread
inserts.
First install tension struts and then tighten down bolts (1).
Tightening torque 33 33 3AZ
.
RA Lowering/raising rear axle carrier
BMW AG - TIS
21.02.2013 16:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
