5 Series E60 530d (M57TU) SAL
41 13 ...
Partial replacement, bulkhead, left (engine
carrier front section removed)
Read contents of Body, General.
The reduced-weight aluminum front end structure (GRAV) is used
on this vehicle.
Observe specific procedure.
Following new body parts are required (refer to EPC):
-
(1) Bulkhead
Open rivet joints in areas (1) and (2).
Installation:
Use 8 rivets (size 13) in area (1).
Use 3 rivets (size 13) in areas (2).
Mark severance cut (1) in accordance with measurements a and
b.
Measurement a=30 mm
Measurement b=10 mm
RA Partial replacement, bulkhead, left (engine carrier front section removed)
BMW AG - TIS
21.02.2013 18:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
