5 Series E60 530d (M57TU) SAL
Mark severance cuts in accordance with specified measurements and cut.
Important!
Cut outer metal sheet only.
Distance a = approx. 150 mm behind bore dia. 6 mm.
Measurement b = approx. 120 mm from middle of lower lock striker screw point.
Open weld joints in areas (1) and (3).
Note:
Side frame is bonded and welded to longitudinal member in area (2).
Installation information:
-
Weld in reinforcement plates at severance cuts.
-
Bond and rivet new part in area (3).
Use Hemlock 813 blind rivet (sourcing reference: BMW Parts Service picture board - Aluminium and
steel/bonding and welding).
Double number of rivets with respect to welding spots in area (3).
RA Replacing rear left side panel (partial replacement, door opening)
BMW AG - TIS
21.02.2013 18:17
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
