Removing & Installing Rear Bumper Trim for BMW 5 Series E60 530d (M57TU) SAL
51 12 156
Removing and installing rear bumper trim
Necessary preliminary tasks:
•
Remove luggage compartment trim on left/right
M5 only:
•
Remove guide for bumper at bottom rear
Release screws (1) from wheel arch cover (2) on left/right.
Release expansion rivet on left/right.
Pull bumper trim (4) out of mounting (3).
Installation:
Make sure bumper trim (4) is correctly positioned in relation to
mounting (3).
Not M5
Release expansion rivets on bottom middle guide.
Release bumper trim (2) from catches (1).
Release screws (1) with sealing washers on left/right.
2
Tail light
3
Trim, rear apron
Installation:
Replace screws (1) with sealing washers.
Tightening torque 51 12 8AZ
.
RA Removing and installing rear bumper trim
BMW AG - TIS
21.02.2013 18:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
