bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

29 RA Removing And Installing_replacing Trim For Preselector Lever (up To 03_2007) > < 28 RA Removing And Installing_replacing Trim For Preselector Lever (from 03_2007)
Page 2
background image

Reach into trim (1) and unclip upwards from retainers (2).

Feed out trim (1) upwards over gaiter (3), disconnect associated
plug connection and remove trim (1).

Installation:

Make sure retainers (1) are correctly seated in associated
mountings of trim (2).

 

Replacement:

If necessary, remove driving dynamics switch.

RA  Removing and installing/replacing trim for preselector lever (from 03/2007)

BMW AG - TIS

21.02.2013  19:16

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

29 RA Removing And Installing_replacing Trim For Preselector Lever (up To 03_2007) > < 28 RA Removing And Installing_replacing Trim For Preselector Lever (from 03_2007)