bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

35 RA Removing And Installing Rear Console At Rear (long Version)|Page 1650 > < 34 RA Removing And Installing Lower Rear Console Trim (long Version)
Page 1
background image

51 16 270

Removing and installing rear console at rear
(long version)

Necessary preliminary tasks:

Remove upper rear console trim

Remove infrared trim

Remove lower rear console trim

Remove drawer

Remove fresh-air grille from rear console

Unclip panel (2) towards front from retainers (1).

Tilt panel (1) forwards slightly and feed out of rear console (2).

Installation:

Make sure panel (1) is correctly seated on panel (2).

Unscrew nuts (1).

Release cable tie (2).

Disconnect plug connections (1) and feed cable out of rear
console cable guides.

RA  Removing and installing rear console at rear (long version)

BMW AG - TIS

21.02.2013  19:19

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

35 RA Removing And Installing Rear Console At Rear (long Version)|Page 1650 > < 34 RA Removing And Installing Lower Rear Console Trim (long Version)