5 Series E60 530d (M57TU) SAL
Note:
Protect bore (1) against scratching (risk of corrosion).
Important!
If the screw is not correctly secured, the lock mechanism can
jump back and the sound insulation must be removed.
Pull outside handle (2) outwards/upwards until screw (3) is
accessible and hold.
Using special tool 51 2 220 , screw down screw (3) in
counterclockwise direction and thereby secure outside
handle (2).
Tightening torque 51 21 5AZ
.
a)
Pull off outside handle (1) from rear lock actuator (2).
b)
Pull off outside handle (1) downwards (as shown in
illustration) from front lock actuator (3).
Installation:
Following parts on outside handle (4) must not be damaged or
missing:
1
Rear mounting
2
Front mounting
3
Felt strip (if available for refitting/replacement no longer
required)
Stop pad (1) must be fitted.
Insert outside handle (4) with bore (3) correctly in mounting (2).
Engage mounting (5) of outside handle (4) correctly in lock
actuator (6).
RA Removing and installing or replacing outside handle from left or right front doo
BMW AG - TIS
21.02.2013 19:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
